A point-of-entry system installed where water enters your home, treating every fixture — kitchen, bathrooms, laundry, and outdoor spigots — from a single unit instead of one filter per tap.
Whole house filtration — also called point-of-entry (POE) filtration — installs on the main water line, typically near where it enters the home or beside the water heater. Every fixture downstream of that point gets treated water, from the kitchen sink to the shower to the outdoor hose bib, without needing a separate filter at each one.
It's a different job than an under-sink RO system: whole house filtration is built to reduce sediment, chlorine, and taste/odor compounds across your entire water usage, not to polish drinking water down to the last dissolved solid. Many households run both — whole house filtration for everything, and RO at the kitchen tap for drinking water.
The system installs on the main line, typically near the water meter or where the line enters the home, ahead of any branch to individual fixtures.
Water passes through sediment and carbon (or other) filtration media that reduce chlorine, sediment, and taste/odor compounds.
Filtered water then flows out to every fixture in the house from that single point, with nothing left untreated.
No per-faucet filters to buy, track, or replace — the whole house is covered from one install.
Reduces the sediment and scale that shorten the life of washing machines, dishwashers, and water heaters.
Chlorine smell and taste drop throughout the home, not just at the kitchen tap.
Matched to your home's actual water usage and flow rate, so pressure stays where it should.
We start every project with a quick water assessment, so whatever we recommend actually matches what's in your water.